Tromen DUOMO HUMMER Guia Del Propietario página 18

ASSEMBLY SEQUENCE
STEP 13: PLACE THE FAT CONTAINERS INSIDE THE EQUIPMENT. MAKE SURE THAT THEY ARE PLACED
IN THE LOWER AREA UNDER THE WALL SO THAT THE PLATES CAN MOVE FREELY (Fig. 13.2)
Fig 13.1
Fig 13.2
STEP 15: REPEAT THE OPERATION WITH THE LEFT GRILL
SLIDE IT TO THE BOTTOM UNTIL IT TOUCHESTHE TOP.
14
LEFT GRILL x1
STEP 17: TO PLACE THE SMALL PLATE, INSERT THE BAR IN THE PLACE SHOWN IN THE IMAGE.
THE SAME AS WITH THE BIG PLATE, MAKE THE SLOT COINCIDE WITH A CONTAINER.
16
SMALL PLATE x1
STEP 14: INSERT THE GRILLS. START WITH THE RIGHT GRILL MAKING IT SLIDES
18
FAT CONTAINER x2
STEP 16: IN THE SAME WAY THAT WITH THE GRILLS, THE PLATE MUST BE PLACED
IN THE FRONT OF THE SLIDINGS. MAKE SURE THAT THE FAT CONTAINER IS UNDER THE SHOWN SLOT.
STEP 18: TAKE THE STOKER AND PLACE IT IN THE DUOMO HUMMER CENTER.
SLOT
BAR
SMALL PLATE
SETTER
ALONG THE SLIDINGS TO THE BOTTOM.
13
RIGHT GRILL x1
15
BIG PLATE x1
BIG PLATE SLOT
17
STOCKER x1
7