Idiomas disponibles
Idiomas disponibles
ASSEMBLY SEQUENCE
Follow the instructions carefully in order to assemble the DUOMO HUMMER
Step 1. Place the two wheels horizontally on the floor and support the "TROMEN floor" and "HUMMER floor"
pieces on top of them.
This will allow to work more easily.
1
TROMEN FLOOR x1
STEP 3: ASSEMBLE THE "LATERAL RIGHT FLOOR" WITH EIGHT SCREWS AND WASHERS. YOU WILL
BE ABLE TO NOTICE THE NUMBERS "3" AND "5". JOIN THE PARTS SO THAT THEY STICK TOGETHER.
MAKE SURE TO TURN THE SCREWS TO THE BOTTOM BUT NOT TO ADJUST TO THE MAXIMUM.
4
34
RIGHT LATERAL FLOOR x1
BLACK NAIL x6
STEP 5: ASSEMBLE THE "WALLS TROMEN JOINTS" WITH SEVEN SCREWS AND SEVEN WASHERS. TURN
THE SCREWS TO THE BOTTOM. IN THIS CASE, DO ADJUST TO THE MAXIMUM. AFTER DOING THIS,
ADJUST ALL THE SCREWS PLACED IN THE PREVIOUS STEPS.
25
34
TROMEN WALL JOINT x2
BLACK NAIL x7
4 BLACK NAILS
+ 4 WASHERS
*Three people are required to assemble this equipment.
2
7
HUMMER FLOOR x1
WHEELS x2
35
40
BLACK WASHER x6
13" TROMEN WRENCH x1
35
40
BLACK WASHER x7
13" TROMEN WRENCH x1
3 BLACK NAILS
+ 3 BLACK WASHERS
Step 2. Join the "TROMEN floor" and the "HUMMER floor" pieces with five screws and five washers.
In both floors you will be able to notice number "1". Join the parts together so that they stick together.
Make sure that you turn the screws to the bottom but not to adjust to the maximum.
1
2
34
TROMEN FLOOR x1
HUMMER FLOOR x1
STEP 4: ASSEMBLE THE LEFT "TROMEN FLOOR" WITH SIX SCREWS AND SIX WASHERS. IN BOTH PIECES
YOU WILL BE ABLE TO NOTICE THE NUMBERS "2" AND "4". JOINT HE PARTSSO THAT THEY ARE STUCK.
MAKE SURE TO TURN THE SCREWS TO THE BOTTOM BUT NOT TO ADJUST TO THE MAXIMUM.
3
34
LEFT LATERAL FLOOR x1
BLACK NAIL x6
STEP 6: PLACE THE "FRONT LEG" WITH FOUR LONG SCREWS, FOUR WASHERS AND FOUR NUTS.
THE SCREWS AND WASHERS WILL BE OUTSIDE THE FRONT LEG AND THE NUTS WILL BE PLACED INSIDE.
WITH THE TROMEN WRENCHES ADJUST TO THE MAXIMUM.
3
34
35
FRONT LEG x1
LONG BLACK NAIL x4
ATTENTION !
MAKE SURE THAT THE FRONT (FLAT SIDE)
OF THE LEG IS IN THE POSITION SHOWN.
35
BLACK SCREWS x5
BLACK WASHER x5
TROMEN WRENCH 13" x1
35
40
BLACK WASHER x6
13" TROMEN WRENCHx1
35
40
BLACK WASHER x4
BLACK NUT x4
13" TROMEN WRENCH x2
5
