Night light feature
This thermometer includes a convenient night light to
illuminate the display in a dim environment.
The light will turn on when you press any button. It will stay
on until the thermometer is inactive for up to 15 seconds
even after temperature is taken.
How to change temperature between °F and °C
If you wish to change the temperature scale of your thermometer:
1
Make sure the thermometer is turned off.
Press and hold down the Power button
2
the display will show this sequence: ° C / SET / ° F / SET.
Release the Power button
3
There will be a short beep to confirm the new setting, then the thermometer
is turned off automatically.
Care and cleaning
The probe tip is the most delicate part of the thermometer. It must be clean and
intact to ensure accurate readings. If the thermometer is ever accidentally used
without a hygienic lens filter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or soft cloth moistened with
alcohol. After the alcohol has completely dried out, you can put a new hygienic
lens filter on and take a temperature measurement.
If the probe tip is damaged, please contact Consumer Relations.
Use a soft, dry cloth to clean the thermometer display and exterior. Do not use
abrasive cleaners. Never submerge this thermometer in water or any other liquid.
Store thermometer and hygienic lens filters in a dry location free from dust and
contamination and away from direct sunlight.
Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR06) batteries.
For best performance, we recommend Duracell
1
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
2
new batteries, making sure the poles are in the right direction.
3
Snap battery door into place.
To protect the environment, dispose of the product and empty batteries
at your retail store or at appropriate collection sites according to
national or local regulations.
Do not mix alkaline, standard, or rechargeable batteries.
8
. After about 3 seconds
when the desired temperature scale is shown.
alkaline batteries.
®
15 sec
15 sec