Idiomas disponibles
Idiomas disponibles
Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
• Keep the ventilation slits clean and dust- free.
Servicing
Tensioning the saw chain
The saw chain must not sag, but it should be possible to pull it 2-4 millimetres off the saw rail in
the middle of the saw rail.
• Unscrew the handwheel anti-clockwise until the saw rail can be moved by
hand.
• Turn the chain tensioning wheel on anti- clockwise to tension the chain.
• Turn the saw chain by hand to check that it runs perfectly. It must slide
freely in the rail.
• Tighten the handwheel to attach the rail and the cover.
NOTE
Check and re-adjust the tension of a new chain after working for a few minutes.
Switch the motor off, remove the battery and actuate the chain brake.
Cleaning oil guide groove in the saw rail
• Remove the saw rail.
• Remove dirt from the oil guide groove using a suitable tool. Use a plastic
spatula, not a steel tool!
• Re-attach the saw rail.
Regrinding saw chain
Special tools are required to sharpen the saw chain and guarantee that the blades of the chain
are sharpened at the correct angle and to the correct depth. We recommend having the saw
chain reground by a specialist.
Spare parts
310mm (12")
360mm (14")
410mm
(16")
69
Saw rail
120SDEA041
140SDEA041
160SDEA041
Saw chain
91PJ045X
91PX045X
91PJ052X
91PX052X
91PJ057X
91PX057X
