Idiomas disponibles
Idiomas disponibles
Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
• Tighten the oil tank cap (a) by hand.
• Check the chain oil level even during operation and top up with chain oil if required.
Checking the chain lubrication
• Start the device (see section "Switching on/ off the power tool").
• Hold the running saw chain for some time approx. 15 cm above a suitable surface. If there is
adequate chain lubrication, the oil which is ejected by the saw chain will form a light trail.
Switching on/off the power tool
Switching on
WARNING!
Ensure that the saw chain has not yet been positioned for cutting and is not touching any other
objects. Risk of injury!
• Hold the chain saw firmly with both hands and ensure that there are no
people (particularly children) or animals in the immediate vicinity.
• Ensure that the chain brake is released before starting the chain saw. To
do this, pull the hand guard back towards the handlebar.
• Press the release button and hold down (1.).
• Press the rear On/Off switch (2.). The saw chain runs.
60
