Idiomas disponibles
Idiomas disponibles
Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
NOTE
Check and re-adjust the tension of a new chain after working for a few minutes. Switch the motor
off, remove the battery and actuate the chain brake.
Pour in chain oil
CAUTION!
– Fill the device only with an environmentally compatible quality chain and bar lubricant
(according to RAL-UZ48).
– Do not use waste oil. Renewed contact with waste oil can cause skin
cancer. Waste oil is environmentally harmful. Waste oil does not have the
necessary lubricating properties and is unsuitable for chain lubrication.
– An oil other than the one recommended may damage the rail, the chain
and the lubricating system.
– Ensure that dirt does not get into the oil tank.
– Avoid spilling oil. Always wipe up any spilt oil.
• Unscrew the oil tank cap (a).
• Carefully pour in the chain lubricating oil until it reaches the upper mark on
the oil level indicator (b).Tank volume: max. 160 ml
• Tighten the oil tank cap (a) by hand.
56
