Idiomas disponibles
Idiomas disponibles
MEASURING TEMPERATURE
1. Set the range switch to "ºC" or "ºF" range.
2. Insert the black (or "-") plug of the K type thermocouple to the "COM"
jack, and the red( or "+") plug to the "INPUT" jack.
3. Carefully touch the end of the thermocouple to the object to be
measured.
4. Wait a moment, read the reading on the LCD.
MEASURING FREQUENCY OR DUTY CYCLE
1. Connect the black test lead to the COM jack and the red to the"INPUT"
jack.
2. Set the range switch to "Hz %" range.
3. Press the "Hz/Duty" Button to select "Hz" or "duty cycle" (%) mode.
4. Connect test leads across the source or load under measurement.
NOTE: The input voltage should be between 200 mV and 10 V rms AC. If
the voltage is more than 10 V rms, reading may be out of the accuracy
range.
