1.
Warning
This device is a scientific precision instrument designed to last for many years with a minimum of maintenance.
It is built to high optical and mechanical standards and to withstand daily use.
We remind you that this manual contains important information on safety and maintenance, and that it must
therefore be made accessible to the instrument users.
We decline any responsibility deriving from incorrect instrument use uses that does not comply with this manual
2.
Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the oper-
ation voltage of the equipment and that the lamp switch is in off-position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label. How-
ever, users do have full responsibility to use this equipment safely.
Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.
3.
Package Contents
DESCRIPTION
Camera
Power supply with USB2.0 socket
0.5X projection lens
Reduction ring 30 mm
Reduction ring 30.5 mm
Micrometric slide
4.
Unpacking
The camera is housed in a moulded Styrofoam container. Remove the tape from the edge of the container and
lift the top half of the container. Take some care to avoid that the optical items fall out and get damaged.
5.
Intended use
For research use only. Not intended for any animal or human therapeutic or diagnostic use.
6.
Symbols and conventions
The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION
This symbol Indicates a potential risk and alerts you to proceed with caution.
QUANTITY
1
1
1
1
1
1
3