Idiomas disponibles
Idiomas disponibles
production program. The LED (12a) will turn
on.
•Should you need to run a preservation cycle
related to a different production program,
before switching from manual mode to
preservation mode, select the desired
p r o d u c t i o n p r o g r a m ( s e e s e c t i o n
" C H A N G I N G T H E P R E S E R V AT I O N
CYCLE").
AUTOMATIC MODE
The
GELATO 15K CREA
of programs which automate the production
and preservation process.
•Follow the steps described in the section
"DIRECTIONS FOR USE".
•Press button (11) to start up the machine in
automatic mode by selecting the first
operation program. The LED flashes for 3
seconds during which, if you keep on
pressing the button (11), you will be able to
select other programs in sequence.
•When the LED becomes steadily lit, the
associated program starts up and begins
the production cycle.
•The machine has 4 production programs
and 4 preservation cycles for each of them.
When the program selected starts up you
can choose the preservation cycle desired.
Chose the preservation cycle by pressing
the button (12) repeatedly. When switching
from the first preservation program to the
fourth, gelato consistency increases
gradually.
•When the ice cream reaches the right
consistency, the production program stops
automatically and the preset preservation
cycle is enabled.
•Every production program has a preset
threshold time after which the machine
enters in preservation cycle, regardless of
the current production phase.
•If deemed appropriate, it is possible to
enable the selected preservation cycle at
any time , ending the production program.
Select the preservation cycle desired via the
key 12 (sequence selection). Keep the
paddle button (2) an compressor button (1)
pressed simultaneously for 3 seconds. The
8
English
machine has a series
machine will immediately switch from
production cycle to preservation cycle.
•CLASSIC ITALIAN GELATO AND SORBET
PROGRAM. By pressing button (11) once,
the LED (11a) will light up and activate the
production program. At the end of the
production cycle, the LED (11a) flashes
indicating that the selected preservation
cycle has been activated.
If the preparation was ready before reaching
the operation time limit, the whipping paddle
locks. The preservation function is
automatically activated.
•
SEMI-SOFT GELATO PROGRAM
pressing button (11) twice, LED (11b) will
light up and activate the processing
program. At the end of the production cycle,
the LED (11b) flashes indicating that the
selected preservation cycle has been
activated.
If the preparation was ready before reaching
the operation time limit, the whipping paddle
locks. The preservation function is
automatically activated.
•
GRANITA PROGRAM
(11) three times causes LED (11c) to light up
and activate Granita processing. At the end
of the production cycle, the LED (11c)
flashes indicating that the selected
preservation cycle has been activated.
If the preparation was ready before reaching
the operation time limit, the whipping paddle
locks. The preservation function is
automatically activated.
•
FAST COOLING PROGRAM.
button (11) four times causes LED (11d) to
light up and activate the fast cooling
program. At the end of the production cycle,
the LED (11d) flashes indicating that the
selected preservation cycle has been
activated.
This program is used when processing
mixtures with high initial temperatures. The
p r o g r a m q u i c k l y b r i n g s d o w n t h e
temperature without adding too much air
into the mixture, saving time and improving
the quality of the ice cream made.
. By
. By pressing button
Pressing
