SHIMADZU Nexera CL Serie Guía Del Sistema página 231

Mensaje de error
Superior: pantalla del panel
Código
de control
de error
Inferior: pantallas de la
estación de trabajo y del
controlador
ERROR
PFILE CALL FILE #
Autosampler: The file number
0x5258
for the CALL command of the
pretreatment program is out
of range. Change the setting
to within the range.
ERROR
PFILE CALL TIMES
Autosampler: The call count of
0x5259
the CALL command in the
pretreatment program is over
19. Make the count 19 or less.
ERROR
PFILE EVENT VALUE
Autosampler: The set value of
0x525A
the EVENT in the pretreatment
program is out of range.
Change the setting to within
the range.
ERROR
PFILE 2nd S.INJ
Autosampler: The start
0x525B
analysis was processed more
than twice in the pretreatment
program. Correct the
pretreatment program.
ERROR
PFILE TOO MANY IF
Autosampler: The
pretreatment program has
0x525C
more than 19 IF commands in
its IF command block. Make
the number of IF commands
19 or less.
ERROR
PFILE NO IF CMD
Autosampler: There is no IF
0x525D
command corresponding to
the ENDIF command of the
pretreatment program. Add IF
command.
Causa principal
El número de archivo
especificado por el
comando CALL del
Cambie la configuración a un valor
programa de
situado dentro del rango
tratamiento previo
especificado.
supera el rango de
configuración.
El comando CALL llama
más de 19 veces en el
Configúrelo en 19 veces o en un
programa de
número inferior.
tratamiento previo.
El valor de ajuste del
comando EVENT del
Cambie la configuración a un valor
programa de
situado dentro del rango
tratamiento previo
especificado.
supera el rango de
configuración.
El análisis se ha iniciado
Revise el programa de tratamiento
dos o más veces en el
previo para que el análisis se inicie
programa de
solo una vez.
tratamiento previo.
El programa de
tratamiento previo
Configúrelo en 19 o en un número
tiene más de 19
inferior.
comandos IF en su
bloque de comandos IF.
No existe un comando
IF correspondiente a un
comando ENDIF del
Añada un comando IF.
programa de
tratamiento previo.
5.4 Lista de mensajes de error
Contramedida
219
Serie CL de Nexera
5
loading