Enabling The Print Feature; Enabling The Overvoltage Alert - Keysight U1273A Manual De Instrucciones

Enabling the print feature

When the print feature is enabled, the multimeter will print out the measured data
when the measuring cycle is complete. The multimeter will automatically send
new data to the remote PC host continuously. The multimeter does not accept
any commands from the PC host when this feature is enabled.
Parameter
PRINT
To enable the print feature:
1 Press
2 Browse to Menu 4 > PRINT, and press
3 Use the arrow keys to enable the print feature.
4 Press
5 Press and hold

Enabling the overvoltage alert

This setting is used with the multimeter's overvoltage alert (see
multimeter's will start beeping periodically once the measured voltage exceeds
the value set, regardless of polarity.
Parameter
V-ALERT
To enable the overvoltage's alert:
1 Press
2 Browse to Menu 5 > V-ALERT, and press
Keysight U1273A/U1273AX User's Guide
Range
OFF or ON
for more than 1 second to enter the multimeter's setup menu.
Setup
to save your changes (or press
until the multimeter restarts to return to normal operation.
Setup
Range
– (0.01 to 999.99) V
– D(isabled) or E(nabled)
for more than 1 second to enter the multimeter's setup menu.
Setup
Multimeter Setup Options
Defaul t setting
OFF
edit the value.
to discard your changes).
page
Defaul t setting
(030.00-D) V
edit the value.
4
28). The
143