MSA Gallet F1XF Manual Del Operador página 10

• Eye and face protectors meeting EN 14458 requirements for electrical properties provide limited
protection, as encountered in situations such as brief accidental unintended contact with live low voltage
conductors. All component parts of the visor/helmet assembly shall have the same marking to achieve this.
Failure to follow these warnings can result in serious personal injury or death.
Face Shield
Ocular Visor (optional)
The ocular visor can be adjusted to optimize the distance between visor and face.
4 Attaching the Accessories
4.1 Neck Curtains
2 types of neck curtain can be installed:
• Neck curtain for rear protection
• Integral neck curtain
GB
1. Position by pulling it completely up or down.
1. Position by pulling it up or down.
2. Tilt the ocular visor towards the face for an optimal fit.
1. Don helmet and pull down ocular visor.
2. Unclip and clip the yellow stopper in positions (A), (B) or (C) to
optimize fit of the ocular visor on the face.
4 Attaching the Accessories
10