Idiomas disponibles
Idiomas disponibles
EN – High Lift Pallet Truck
1.‐ INTRODUCTION
This manual must be considered as a part of the machine (EN 292/2) and you must keep it
during all its working life in a spot known by the users.
Attention!!
This annotation will be used whenever a dangerous situation, for the
operator, could arise.
Attention!!
You must read this manual carefully. The aim of this manual is to help
the operator to start this machine in a correct way and to explain the safety procedures of the
European Community, in order to avoid any risks which could occur due to a misuse of the
machine.
This machine must be used only for the designed functions. Any other use will be considered as
inappropriate, and therefore dangerous. Therefore, IMCOINSA will not be responsible for any
possible damages occurred to people or things, due to a misuse or an inappropriate use of the
machine.
Please, bear in mind, as well as these rules, the regulations in force, which you must apply in
those places where the machine is in use.
IMCOINSA saves himself the right to realize modifications or improvements to the machine.
For any asks or incidents, contact the Distributor where you acquired the product or with the
nearest Technical Service of IMCOINSA.
2.‐ CAUTIONS
Read the safety instructions to have a better knowledge about the safety systems and the
potential of the machine.
Attention!!
Keep away from children's reach. Place the machine in a safe place once
the work is finished.
The pallet trucks of IMCOINSA have been designed to work under the best safety measures but
only if you follow all mentioned instructions. Read this manual before you start working with
the machine. A misuse could cause personal and material damages.
Do not try to repair the machine and do not try to accede to any internal parts. Contact, always,
with an authorized establishment of IMCOINSA.
The businessman must lean the machine, only to adult people, who must be in perfect physical
and mental conditions. He also must be sure that these persons are qualified.
You must check frequently that the machine does not have any damages. You must verify that
all the safety parts, work correctly and that none part of the machine is damaged.
Be sure that all moving parts are not stuck, that they work properly and that they are properly
assembled.
Start working with the machine only in case, you fulfil both, safety and instruction regulations.
The workers must know about all the safety regulations. Wherever you work with the machine,
do it with a proper light.
0X40 ‐ LI ‐SP‐EN‐FR‐ REV 200309
14 / 32
