Idiomas disponibles
Idiomas disponibles
EN
26
CLEANING AND CARE
1. Turn on the burner for 15-20 minutes. Let the device cool down completely before
cleaning.
2. Grill grids should be soaked in soapy water and washed periodically.
3. The inner surfaces of the grill cover should also be washed with hot, soapy water.
To remove stubborn stains, use a wire brush, steel brush or scouring pad.
4. Check the burner regularly to make sure it is free of insects and spiders that could
clog the gas line and divert the gas flow. Clean the venturi tubes with extreme care
and make sure they are not blocked. We recommend using a pipe cleaner for this.
Any modifications to the device are dangerous and therefore prohibited.
TROUBLESHOOTING
Problem
Gas leaks from
the hose.
Gas leaks from
the gas bottle.
Gas is leaking from
the gas bottle valve.
Gas leaks between
the gas bottle and
the regulator.
Potential cause
The hose is damaged.
Mechanical failure
or mishandling.
Mechanical failure
or mishandling.
Incorrect installation,
no firm connection,
defective sealing ring.
Prevention/solution
Turn off the gas at the gas
bottle. Check for cuts or
tears in the hose. Replace
the hose. Check the gas
bottle and regulator. Perform
the soapy water test.
Turn off the gas bot-
tle shut-off valve.
Turn off the gas bottle
shut-off valve. Bring the gas
bottle back to the dealer.
Turn off the gas bottle shut-off
valve. Remove the regulator
and inspect the O-ring for
visible damage. Perform
the soapy water test.
