Cleaning And Maintenance; Noise And Vibration Information; Declaration Of Conformity - Wurth Master TKS 59-E Instrucciones De Servicio

Cleaning and maintenance

Always unplug the device before working
on it.
Always keep the device and the ventilation holes
clean.
The blade guard must always move freely and allow
itself to be closed independently. Therefore always
keep the blade guard area clean. Remove dust and
shavings using compressed air or a brush.
Unlaminated blades can be protected from corro-
sion with a thin coating of acid-free oil. Remove the
oil before use, or the wood will be stained.
Resin and glue residue on the blade results in
a bad cut. Therefore clean the blade immediately
after use.
If — in spite of meticulous manufacturing and test-
ing processes — the device breaks down, have it
serviced by a Würth master technician. In Germany,
you can call Würth master service free of charge
at 0800-WMASTER (0800-962 78 37). In Austria,
call 0800-20 30 13.
For all queries or replacement part orders, please
have your device's item number ready. It can be
found on the model identifi cation plate.
The current list of replacement parts is on the Inter-
net at http://www.wuerth.com/partsmanager, or you
can request it from your nearest Würth subsidiary.
Disposal
Power tools, accessories and packaging should be
recycled in an environmentally compliant manner.
For EU countries only:
Do not discard power tools with ordi-
nary household refuse!
According to European directive 2002/96/EC on
used electrical and electronic devices and its im-
plementation in national law, power tools that are
no longer in service must be collected separately
and disposed of in an environmentally compliant
manner.
Warranty
For this Würth power tool, we offer a warranty from
the date of purchase according to the legal/coun-
try-specifi c regulations. (A receipt or packing slip
serves as proof of purchase.)
Damage due to natural deterioration, overload or
improper handling is not covered by the warranty.
22-English
Claims can be honoured only if the power tool is
handed over undismantled to a Würth subsidiary,
a Würth field employee or a Würth-authorised
customer service facility for electrical and com-
pressed-air tools.

Noise and vibration information

Values determined in accordance with EN 60 745.
L (acoustic pressure)
pA
K (uncertain acoustic pres-
pA
sure)
L (acoustic power)
WA
K (uncertain acoustic
WA
power)
Total vibration values (triax vector sum) determined
according to EN 60745:
Vibration emission value = 2.1 m/s
Uncertainty K = 1.5 m/s
The vibration level given in this manual has been
determined according to a measurement process
standardised in EN 60745 and can be used for
comparing power tools with one another. It is also
suitable for preliminary assessment of vibration
stress.
The vibration level shown represents the power
tool's primary applications. The vibration level can
vary if the power tool is used for other applications,
with various attachments or with insuffi cient mainte-
nance. This can considerably increase the vibration
stress over the total period of use.
For a precise assessment of the vibration stress,
one should also consider the times during which the
device is switched off or is running but is not actually
in use. This can considerably reduce the vibration
stress over the total period of use.
Determine the additional safety measures neces-
sary to protect the operator from the effects of
vibration, such as: Maintenance of the power tools
and attachments, keeping the hands warm and
organisation of work processes.

Declaration of conformity

Under our sole responsibility, we declare that the
product described under "Technical Data" conforms
to the following standards or normative documents:
2006/42/EC, EN60745-1, EN60745-2-5, EN55014-
1, EN55014-2, EN61000-3-2, EN61000-3-3.
TKS 59-E
dB(A) 91
dB(A) 3
dB(A) 102
dB(A) 3
2
2