Wurth Master TKS 59-E Instrucciones De Servicio página 19

e) Do not operate the saw if riving knife is bent.
Even a tight interference can slow the closing
rate of a guard.
Additional safety instructions for
plunge-type saws
Wear ear protectors. Exposure to noise can
cause hearing loss.
Wear a dust mask! Exposure to dust particles
can cause breathing diffi culty and possible
injury.
Do not use blades of larger or smaller diam-
eter than recommended. For the proper blade
rating, refer to the technical data. Use only the
blades specifi ed in this manual, complying with
EN 847-1.
Never use abrasive cut-off wheels.
Residual risks
Even if all relevant safety regulations are ob-
served, and safety devices are used, certain
residual risks cannot be avoided. These are:
– Hearing damage
– Risk of accidents caused by uncovered
parts of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of dust inhalation from materials that
can be harmful when cut.
Use only original Würth accessories.
Read all safety information and
instructions. Failure to comply with
the safety information and instruc-
tions can lead to electric shock, burns
and/or severe injury. Keep all safety
information and instructions for future
reference.
Position of the date code (fi g. A)
The date code is stamped onto the side of the base
plate (21).
Specifi cations
Item number
Circular plunge saw
Power
No-load speed
Blade bore
Maximum cutting depth
- 90° (without guide rail)
- 90° (with guide rail)
Blade bore
TKS 59-E
0702 158 X
V~ 220-240
W 1300
-1
min 1750-4000
mm 165
mm 59
mm 55
mm 20
Bevel angle adjustment
Weight
Protection class
Fuses:
230 V tools 10 A power supply
Components
1. Plunge trigger
2. ON/OFF switch
3. Main handle
4. Base plate
5. Bevel adjustment knob
6. Depth adjustment knob
7. Depth scale
8. Front handle
9. Dust ejection
10. Guide adjustment
11. Blade
12. Lock button
13. Locking lever
14. Blade clamping screw
15. Outer fl ange
16. Inner fl ange
17. Riving knife
18. Riving knife adjustment screws
19. RPM adjustment wheel
20. Cutting indicator
21. Date code
22. Outer guard
23. Guide rail
24. Screw clamp
25. Blade position indicators
Some accessories depicted or described are
not included with the device.
Proper use
This device is intended for making straight length-
wise or transverse cuts and bevel angles up to 45°
in wood on a stable support.
Observe the blade recommendations. The user is
liable for damages resulting from unintended use.
If you have questions about the device and its use,
in Germany contact product and user support by
calling 01805-60 65 69 (14 cents/min.).
TKS 59-E
45°
kg 5
II
19-English