Maintenance And Cleaning; Noise/Vibration Information; Declaration Of Conformity - Wurth Master SBS 1300-VES Instrucciones Para El Manejo

SBS 1300 - D.book Seite 11 Dienstag, 27. Februar 2007 9:35 09

Maintenance and Cleaning

Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
If the machine should fail despite the care taken in
manufacturing and testing, repair should be carried
out by a Würth Master-Service agent.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Les outils électroportatifs, ainsi que leurs accessoires
et emballages, doivent pouvoir suivre chacun une
voie de recyclage appropriée.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its
incorporation into national law, power tools that are
no longer suitable for use must be separately col-
lected and sent for recovery in an environmental-
friendly manner.
Warranty
For this Würth tool, we provide a warranty in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or
a Würth field service employee.

Noise/Vibration Information

Measured
EN 60 745.
Typically the A-weighted noise levels of the tool are:
Sound pressure level: 92 dB (A); Sound power level:
103 dB (A). Measurement uncertainty K =3 dB.
Wear ear protection!
The typical hand-arm vibration is below 9.2 m/s

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
EN 55 014-1,
EN 61 000-3-3, according to the provisions of the
regulations 89/336/EEC, 98/37/EEC.
07
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
values determined according
documents: EN 60 745,
EN 55 014-2, EN 61 000-3-2,
R. Bauer
to
2
.
11