Maintenance And Cleaning; Noise/Vibration Information; Declaration Of Conformity - Wurth Master STP 120-A Instrucciones Para El Manejo

STP 120-A.book Seite 16 Freitag, 27. Juli 2007 4:51 16

Maintenance and Cleaning

Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
In order to avoid operational malfunctions, do not
saw gypsum board from below or overhead.
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The pro-
tective insulation of the machine can be degraded.
The use of a stationary extraction system is recom-
mended in such cases as well as frequently blow-
ing out the ventilation slots and installing a resid-
ual current device (RCD).
The guide roller 7 should occasionally be checked
for wear and lubricated with a drop of oil. If it is
worn, it must be replaced.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Warranty
For this Würth machine, we provide a warranty in
accordance with statutory/country-specific regulati-
ons from the date of purchase (proof of purchase by
invoice or delivery note). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be accepted only when the machine is
presented undisassembled to a Würth branch office
or a Würth field service employee.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
16
its incorporation into national law, power tools that
are no longer suitable for use must be separately
collected and sent for recovery in an environmen-
tal-friendly manner.

Noise/Vibration Information

Measured
EN 60 745.
Typically the A-weighted noise levels of the machine
are: sound pressure level 85,7 dB (A); sound power
level 96,7 dB (A). Measurement
uncertainty K = 3 dB.
Wear hearing protection!
The typical weighted acceleration is 4.9 m/s

Declaration of Conformity

Cordless Jigsaw (0700 216 X):
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
EN 55 014-2,
according to the provisions of the regulations
86/188/EEC, 89/336/EEC, 98/37/EC,
2006/95/EC.
Battery charger
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
EN 60 335-2-29,
EN 55 014-2,
according to the provisions of the regulations
89/336/EEC, 2002/95/EC, 2002/95/EC,
2006/95/EC.
07
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electri-
cal and electronic equipment and
values determined according
documents: EN 55 014-1,
EN 60 745-1, EN 60 745-2-11
(0700 800):
documents: EN 60 335-1,
EN 60 336, EN 55 014-1,
EN 61 000-3-2, EN 61 000-3-3
R. Bauer
to
2
.