MAIN OPERATION ____________________________
First time use
1. When the device is connected power
at first time, long press the » «
button for 3 seconds, the device
starts at the standby mode.
Display: <Welcome logo>, and then
•
<00:00:00 (blinking)>
In background operation, the device
•
starts to search DAB and FM radio
stations for auto time sync function in
background.
2. The time will be updated
automatically in minutes.
Display: <Current Time and Date (if
•
available)>
Note:
If the radio station signal is too weak,
•
the time will not be sync. In this case,
the blinking <00:00> will keep show on
the display.
Then the time need consider be set
•
manually.
Tuning and storing radio stations
(DAB and FM) – first installation
When the device is connected to power
source for the first time or after factory
reset; as defaulted the Auto Tuning
System will start to scan the whole DAB
bandwidth. The device will then scan
the FM waveband. The time is updated
automatically.
1. Once power source is connected,
long press the » « button for 3
seconds, the device starts at the
standby mode in the first time use.
(The device will be at the standby
mode after factory reset)
2. Short press the » « button to power
on the device.
3. The device starts the Auto Tuning
System functions to scan the whole
DAB bandwidth and stores the found
stations in the station list (program
list).
Display: <Scanning...>
•
4. After the full scan processing
completed, the device is used DAB
mode and the first received station
for listen.
5. Press »
« or »
volume level when necessary.
Storing DAB radio stations to
presets
After the automatic station search, all
radio stations will be stored in the program
list. You can store your favored DAB radio
stations into presets memory 1-30.
1. Short press the »PRE/MEM« button to
open the station list.
Display: <the name of the radio station>
•
2. Again short press the » « or »
« button repeatedly to select the
desired station (e.g. BBC 6 Music)
and short press the » « to confirm.
« to set the
ENGLISH
35