Foppapedretti Divo Manual De Instrucciones página 29

• ENGLISH •
USE
ADJUSTING THE HANDLE/HOOD
Press the side buttons and adjust the handle to the new position, release the buttons and make sure that it is locked
(fig.51, 52).
COVER
Fix the cover along the sides with the press studs (a), attach the flaps with the press studs to the hood (b), (fig. 53, 54).
Lift up the front fabric flap of the cover for added protection (c), attach the press studs (fig. 55).
CLOSING THE CARRYCOT
• Remove the cover (fig. 56).
• Take out the inner mattress (fig. 57).
• Unhook the Velcro and lift up the fabric along the side on the inside (fig. 58).
• Grasp the belt and, pulling towards the inside of the carrycot, release the support bracket from the clips and close it
towards the inside of the carrycot. Repeat this process also on the second support bracket (fig. 59).
• Place the handle in a horizontal position (fig. 60).
• Fold down the hinge inwards. Repeat this process also with the second hinge (fig. 61, 62).
• Fold the bottom of the carrycot upwards (fig. 63).
• Insert the mattress inside the carrycot (fig. 64).
• Place the cover on the frame and attach the press studs at the sides (fig. 65).
CARRYCOT COMPONENT
Fitting the accessory: Align the coupling device of the carrycot and press downwards, a click will indicate that the carrycot
has attached correctly to the stroller frame. Make sure that the accessory has been fastened correctly on both sides.
(fig.66).
WARNING: Before use, always make sure that the accessory has been secured correctly. When the accessory is lifted
upwards it must not detach from the pushchair chassis.
Removal of carrycot: PRESS the buttons "a", on both sides, and remove the carrycot by lifting it up using the handle
(fig.67).
CAR SEAT COMPONENT
Fitting the accessory: Align the coupling device of the car seat and press downwards, a click will indicate that the carrycot
has attached correctly to the stroller frame. Make sure that the accessory has been fastened correctly on both sides.
(fig.68).
WARNING: Before use, always make sure that the accessory has been secured correctly. When the accessory is lifted
upwards it must not detach from the pushchair chassis.
Removal of car seat: PRESS the buttons "a", on both sides, and remove the carrycot by lifting it up using the handle.
(fig.69).
29