S&P AIRSENS WIFI CO2 Manual De Instrucciones página 15

TECHNICAL DATA
Power supply voltage ........................... 100-240Vac – 50/60Hz
Protection against electric shock ........ Class II
Installation type required ..................... Tipo X
Maximum consumption ....................... 1,0W
Maximum current ................................ 0,01A
Output................................................... 0-10Vdc, 2-10Vdc, maximum current 5mA
Relay NC .............................................. 3A – 250Vac
Relay NO .............................................. 3A – 250Vac
WIFI features:
Frequency............................................. 2,4GHz
Max. power ........................................... <20dBm (EIRP)
BW ........................................................ 40MHz
Electric connection: All cables used must fulfi l with IEC 60.227.
5 x terminals, supply and relay ............ Min. 0,5 mm
2 x terminals, analogue output ............ Min. 0,25 mm
Note: Same tool can be used for both terminals types
Measurement range:
CO2 ....................................................... 450-2000ppm
VOC ....................................................... 450-2000ppm (CO2 equivalent relative)
RH......................................................... 45-100%
Accuracy:
CO2 ....................................................... ± 50ppm
VOC ....................................................... ± 100ppm
RH......................................................... ± 2%
Warm-up time:
CO2 ....................................................... 1 minute
VOC ....................................................... 5 minutes (relative reference)
RH......................................................... 30 seconds
Ambient air humidity ........................... 10-95% without condensation
Case dimensions [height x width x deep.] .. 89 x 122 x 26 mm
ENVIRONMENTAL DATA
Ambient temperature .......................... 0-50°C
Covering classifi cation ......................... IP30
Pollution degree................................... 2
Weight .................................................. 150 g
2
cable / Máx. 1,5 mm² cable
M3 screw and 0,5 Nm torque
2
cable / Máx. 1,0 mm² cable
M2 screw and 0,3 Nm torque
EN
15