Idiomas disponibles
Idiomas disponibles
10- Timer selection
11- Boost
12- On/Off
Use the induction cooking zones with
suitable cookware.
After mains voltage is applied, all displays
are illuminated briefly. After this, the hob is
in stand-by mode ready for operation.
The hob is controlled by the pressing the
appropriate electronic button. Each button
press is followed by a buzzer sound.
Switching the appliance on
Switch the hob on by touching ON/OFF
button
. All heater displays show a
static ´0` and the bottom right dots blink.
(If a cooking-zone is not selected within 20
seconds, the hob will automatically turn off).
Switching the appliance off
Switch the hob off at any time by touching
.
The ON/OFF button
in the switch off function.
Switching the cooking-zones on
Touch the heater selection button that
corresponds to the heater you wish to
cook on. A static dot will be shown on the
selected heater display and the blinking
dots on all other heater displays will no
longer illuminate.
Select the temperature setting by using the
increase heat setting button
heat setting button
now ready to cook on. For faster boil times,
select the desired cooking level and then
touch the P button to activate the Boost
function.
Switching the cooking-zones off
Select the element you want to switch off by
pressing the heater selection button. Using
the
button, turn the temperature down to
´0`. (Also, pressing the
simultaneously turns the temperature to
´0`).
If the cooking zone is hot, ´H` will be
displayed instead of ´0`.
Switching all cooking-zones off
To turn all the cooking zones off at once,
press the
button
In the stand-by mode, an ´H` appears on all
cooking zones which are hot.
Residual heat indicator
The residual heat indicator indicates that
the glass ceramic area has a temperature
always has priority
or decrease
. The element is
and
buttons
that is dangerous to touch.
After switching off the cooking zone, the
respective display shows ´H` until the
corresponding cooking zone temperature is
at a safe level.
Smart Pause
Smart Pause, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the Smart Pause,
the heaters will automatically return to the
previous level.
If the Smart Pause is not de-activated, the
cooktop will turn off after 30 minutes.
Touch (
) to activate Smart Pause. The
power for the activated heater(s) will reduce
to level 1 and ´II` will appear at all displays.
Touch (
) again to deactivate Smart
Pause. ´II` will disappear and the heaters
will now run at the level previously set.
Safety switch off function
A cooking zone will automatically be
swiched off if the heat setting has not been
modified for a specified duration of time. A
change in the heat setting of the cooking
zone resets the time duration to the initial
value. This initial value depends on the
selected temperature level.
Heat setting
1-2
3-4
5
6-9
Child Lock
After switching on the appliance, the child
lock function can be activated. To activate
the child lock, simultaneously press the
increase heat setting button
decrease heat setting button
press the increase heat setting key
again. ´L` indicating LOCKED will appear
on all heater displays and the controls
can not be used. (If a cooking zone is in
the hot condition, ´L`and ´H` will display
alternately).
The hob will remain in a locked condition
until unlocked, even if the appliance has
been switched off and on.
To deactivate the child lock, first switch
on the hob. Simultaneously press the
increase heat setting button
decrease heat setting button
EN - 15
Safety switch off after
6 Hours
5 Hours
4 Hours
1.5 Hours
and
and then
and
and then
