Idiomas disponibles
Idiomas disponibles
During this process, the "CLEAN" light will always be on, and the digit window
will indicate the remaining time.
6. After the self-cleaning program is complete, remove the drainpipe from
the water tank and drain the cleaning solution down to the lower ice
storage bin. Shake the unit slightly to drain the cleaning solution
completely. Then, reinstall the drainpipe to the slot in the water tank.
7. Repeat steps 4-6 to clean the ice making assembly system as often as is
necessary.
WARNING:
• Nickle-Safe Ice Maker Cleaning Solutions contains acids.
• DO NOT use or mix cleaning solutions any other solvent-based cleaning
products.
• Use rubber gloves to protect hands. Carefully read the safety instructions on
the container of the ice machine cleaner.
8. Open the water faucet of the main water supply and let the water flow
back into the unit. Again, press and hold the "TIMER CLEAN" button on the
control panel for at least 5 seconds to enter the self-cleaning program.
During this process, the "CLEAN" light will always be on, and the digit
window will indicate the remaining time. Through this process, the water-
dividing pipe, evaporator, water pump, silicone pipe, water tank, etc. will
all be rinsed with clean water to ensure no cleaning solution is left in your
unit.
9. After one self-cleaning program is complete, remove the drainpipe from
the water tank, drain the wastewater down to the lower ice storage bin,
and shake the unit slightly to drain the water completely. Then, reinstall
the drainpipe to the water tank slot tightly.
10. Repeat steps 8-9 twice.
11. Follow the above program to clean the ice storage bin.
12. When this cleaning program is finished, you can return to the unit to its
regular ice-making mode. Discarding the first batch of ice made after
cleaning is recommended.
www.newair.com
EN
30
