Stihl MSA 300.0 Manual De Instrucciones página 48

English
► If the chain continues to rotate: Engage the
chain brake, remove the battery and contact
your STIHL servicing dealer.
Your chainsaw is defective.
10.6 Checking Chain Lubrication
► Fit the battery.
► Disengage the chain brake.
► Hold the guide bar over a light surface.
► Switch on the saw.
Chain oil is thrown off the chain and is visible
on the light surface. Chain lubrication is oper‐
ating properly.
► If no chain oil can be seen:
► Fill up with chain oil.
► Check chain lubrication again.
► If chain oil is still not visible on the light sur‐
face: Do not use your chain saw and con‐
tact your STIHL servicing dealer. Chain
lubrication is defective.
10.7 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use
the battery and contact your STIHL servicing
dealer.
There is a malfunction in the battery.
11 Operating the Saw
11.1 Adjusting the Oil Feed Rate
The chainsaw has an adjustable oil pump.
The oil feed rate is suitable for most applications
when the oil pump adjusting screw (1) is in posi‐
tion E (Ematic).
The oil pump feed rate can be adjusted to suit
different bar lengths, wood species and working
techniques.
To increase the oil feed rate
► Switch off chainsaw, engage the chain brake
and remove the battery.
► Turn the oil pump adjusting screw (1) clock‐
wise.
48
1
To reduce oil feed rate
► Switch off chainsaw, engage the chain brake
and remove the battery.
► Turn the oil pump adjusting screw (1) counter‐
clockwise.
11.2 Holding and Controlling the
Chainsaw
1
► Hold and control the chainsaw with your left
hand on the handlebar and your right hand on
the grip area (1) of the control handle so that
your left thumb wraps around the handlebar
and your right thumb wraps around the control
handle.
11.3 Setting the Power Level
You can set 3 power levels:
: Sawing, low chain speed, low
–
power
: Felling, medium chain speed, maxi‐
–
mum power
: Limbing, maximum chain speed,
–
maximum power
Depending on the application, you can set 3
power levels. The LEDs indicate the selected
power level. The higher the power level, the
faster the saw chain can run.
The selected power level affects the battery's
runtime. The lower the power level, the longer
the runtime.
4
2
► Press and hold the trigger lockout (1).
► Press the unlock button (2).
The "STATUS" (3) LED and the LED of the
power level last used light up.
11 Operating the Saw
3
1
0458-009-9801-A