4 Safety Precautions
19 Cover
2
The cover is the placeholder for a Smart Con‐
nector 2 A.
20 Pushbutton
The pushbutton is used to set the power
level.
21 Oil tank cap
The oil tank cap closes the oil tank.
22 Felling notch
The felling direction can be controlled by the
felling notch.
23 Oil pump adjusting screw
The oil pump adjusting screw is used to
adjust the saw chain oil feed rate.
24 "STATUS" LED
This LED shows the status of the chainsaw.
25 "TEMPERATURE" LED
This LED indicates whether the chainsaw is
too hot.
26 "CHAIN BRAKE" LED
This LED indicates whether the chain brake is
engaged.
27 "POWER LEVEL" LEDs
These LEDs indicate the selected power
level.
28 Battery
The battery supplies the chainsaw with
power.
29 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
30 Pushbutton
The button activates the LEDs on the battery.
# Rating plate with machine number
3.2
Feature
Depending on the market, the chainsaw may
have the following features:
The cover is part of the motor housing. Only remove the cover to install a Smart Connector 2 A,
2 )
and store it safely for later re-installation. Always use the brushcutter with the cover or Smart Con‐
nector 2 A installed.
0458-009-9801-A
1 "SAW CHAIN OIL" LED
This LED indicates when the oil tank is
empty.
3.3
Meanings of symbols that may be on the chain‐
saw and battery:
1.
1
4
4.1
Meanings of warning symbols on the chainsaw
or the battery:
Symbols
This symbol shows the direction of
rotation of the saw chain.
Turn in this direction to tension the saw
chain.
This symbol marks the saw chain oil tank.
This symbol marks the oil pump adjust‐
ing screw and the chain oil feed rate.
Direction in which the chain brake is
engaged or released.
This symbol marks the unlock button.
Press the unlock button to set the
power levels.
Clean the air filter with STIHL special
2.
cleaner or a detergent and wash off
with water.
1 LED lights up red. The battery is too
warm or too cold.
4 LEDs flash red. There is a fault in the
battery.
Length of guide bar that may be used.
Guaranteed sound power level in
L
accordance with Directive 2000/14/EC
WA
in dB(A) for the purpose of comparing
the sound emissions of products.
The information next to the symbol indi‐
cates the energy content of the battery
according to the cell manufacturer's specifi‐
cation. The energy content available in
operation is lower.
Do not dispose of the product with domes‐
tic waste.
Safety Precautions
Warning Symbols
English
35