Tilt-Out Door Basket; Durabase; Durabase Divider; Pullout Drawer - Kenmore 795.7160 Manual De Uso Y Cuidado

Congelador inferior refrigerador
Ocultar thumbs Ver también para 795.7160:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TILT-OUT DOOR BASKET

To remove basket
1. Pull one of the brackets upward.
2. Remove basket from both brackets.
To replace basket
1. Insert bracket into one side. Hook end of basket
into bracket.
2. Hook other basket end into other bracket. Push
bracket down into place.
3. Be sure back of basket goes behind retention tab
on each bracket.

DURABASE

1. To remove the Durabase, push it to the back as
much as possible. Tilt up the front of the Durabase
and pull straight out.
2. To install, insert the Durabase into the rail
assembly.
1
USING YOUR REFRIGERATOR
1
2
2

DURABASE DIVIDER

The Durabase divider allows you to organize the
Durabase area into sections.
w w WARNING: If the Durabase divider is removed,
there is enough open space for children or pets to
crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to go near or
touch the freezer drawer.

PULLOUT DRAWER

To remove the drawer, push in the tabs (1) on both
sides of the drawer and lift up on the front (2) and
pull it straight out (3).
1
To install the drawer, pull out both rails to their full
extension, raise the front of the drawer up and align
the gears on the back of the drawer to rail assembly.
Gently push down on the front of the drawer until the
tabs on each side snap into place.
24
3
2
Tabla de contenido
loading

Este manual también es adecuado para:

Mfl63264256

Tabla de contenido