Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
Step 5
Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
Step 6
Pull the door trim to the front to re‐
move it.
Step 7
Hold the door glass panels by their
top edge and carefully pull them out
one by one. Start from the top panel.
Make sure the glass slides out of the
supports completely.
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
Make sure that you put the glass panels (A
and B) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and as‐
sembly easier.
When installed correctly the door trim clicks.
Make sure that you install the middle panel of
glass in the seats correctly.
68/264
clean the glass panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
2
B
A
B
1
A
B
