Kärcher BDS 43/180 C Manual Del Usuario página 13

Shutting down
 Disconnect the mains plug from the
socket.
 Loosen the clamps of the level adjust-
ment.
 Move the handle into a vertical posi-
tion.
 Tighten the clamps of the level adjust-
ment.
 Remove the detergent tank (option) and
dispose of unused detergent solution.
 Coil the mains cable as shown.
 Rinse the detergent tank (option) with
clear water.
 Place the appliance into the parking po-
sition.
 Remove the driver plate / disc brush.
 Clean the casing with a damp cloth.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Loosen the clamps of the level adjust-
ment.
 Move the handle into a vertical posi-
tion.
 Tighten the clamps of the level adjust-
ment.
 Tilt the appliance backwards into the
transport position and drive it to its des-
tination location.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
 Place the appliance into the parking po-
sition.
 Store the appliance in a dry room, frost-
protected room.
Maintenance and care
 Rinse contaminated disc brushes with
water.
 Wash contaminated pads at a max.
temperature of 60 °C.
 Clean the casing with a damp cloth.
 Check the mains connection cable for
damages.
– 4
EN
Transport
Storage
13