Statement 1004 Installation Instructions
Warning
Read the installation instructions before using, installing, or connecting the system to the power
source.
Statement 1005 Circuit Breaker
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. To
reduce risk of electric shock or fire, ensure that the protective device is rated not greater than:
5A
Statement 1006 Chassis Warning for Rack-Mounting
and Servicing
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
Statement 1017 Restricted Area
Warning
This unit is intended for installation in restricted access areas. Only skilled, instructed, or qualified
personnel can access a restricted access area.
Regulatory Compliance and Safety Information - Cisco Catalyst IE3100 Rugged Series Switches
4
Regulatory Compliance and Safety Information Cisco Catalyst IE3100 Rugged Series Switches
with the heaviest component at the bottom of the rack.
servicing the unit in the rack.
