Idiomas disponibles
Idiomas disponibles
WARNING
Before using the pump the user shall read the instructions. Read and follow all the safety and
operating instructions to reduce personal injuries and damage to the pump.
SAVE THIS INSTRUCTION MANUAL
You will need the instruction manual to check the safety and caution rules, assembly instructions, maintenance
and operation procedures, installation and electric diagram.
Keep the invoice together with this instructions manual. Write down the invoice number in the inner side of
the front cover. Save the instructions and invoice in a dry and safe place for future reference.
TECHNICAL CHARACTERISTICS:
BOAJ-1/2
12407
Voltage
Frequency
Current
Speed
Inlet / Outlet Diameter
Maximum Depth
Maximum Flow
Maximum Total
Manometric Height
BOAJ-1
12408
Voltage
Frequency
Current
Speed
Inlet / Outlet Diameter
Maximum Depth
Maximum Flow
Maximum Total
Manometric Height
BOAJ-1-1/2
12409
Voltage
Frequency
Current
Speed
Inlet / Outlet Diameter
Maximum Depth
Maximum Flow
Maximum Total
Manometric Height
Work Cycle: 50 minutes' work x 20 minutes' rest
Maximum 6 hours' daily
Power Cord Grips used in this product: Type "Y".
Pump Build Quality: Basic Insulation
Insulation Class: I
Thermal insulation on motor winding: Class B
ATTENTION
When the power cable gets damaged it should only be replaced by the manufacturer or at a
Truper
Authorized Service Center. Avoid the risk of electric shock or severe injury
®
Power Cord Grips used in this pump is Type "Y".
The build quality of the electric insulation is altered if while in use spills or liquid get into the tool.
WARNING
Before gaining access to the terminals all
power sources should be disconnected.
1
127 V~
60 Hz
5 A
3 400 RPM
1" x 1"
29.5 ft
11.3 gal/min
114.8 ft
127 V~
60 Hz
11 A
3 400 RPM
1" x 1"
29.5 ft
19.2 gal/min
124.6 ft
127 V~
60 Hz
15 A
3 400 RPM
1" x 1"
29.5 ft
18.4 gal/min
157.4 ft
This symbol indicates this pump
is in compliance with Official
Mexican Standard (NOM)
