Idiomas disponibles
Idiomas disponibles
ENGLISH
DC VOLTAGE (LESS THAN 600V)
1. Insert RED test lead into VΩ jack
COM jack
highest V DC (
2. Measure voltage and rotate the Function Selector Switch
to successively lower V DC (
resolution measurements.
NOTE: When in a voltage setting and the test leads are open,
readings of order mV may appear on the display. This is noise and
is normal. By touching the test leads together to close the circuit
the meter will measure zero volts.
NOTE: The hazardous voltage indicator
NOTE: Do not attempt to measure more than 600V or 200mA.
Black lead
DC CURRENT 200mA to 10A
1. For DC currents more than 200mA and less than 10A, insert
RED test lead into 10A jack
jack
, and rotate Function Selector Switch
4
10A DC setting.
Red lead Black lead
8
, and rotate Function Selector Switch
4
) setting (600V).
Red lead
, and BLACK test lead into
5
) settings to obtain higher
will appear for voltages >30V.
, and BLACK test lead into COM
3
to the
2
to the
2
