Techno Line WT 460 Manual De Instrucciones página 10

LISTENING TO THE FM RADIO
1. To turn on the radio, press RADIO/SLEEP once, the display shows "ON" and then shows
the radio frequency readings in Mhz.
2. Press / to tune the radio to a desired station. Press and hold
next clear station.
3. To adjust the volume, press VOL once, the display shows "L07", press
volume from L01 (minimum) to L15 (maximum)
4. P ress to turn off the radio.
Remark: Keep your radio away from fluorescent lamps or other electronic devices, which may cause
interference to the radio.
USING THE PRESET MEMORY
This clock radio features 10 preset memories of FM stations. These allow you to preset your favorite
stations and access them quickly.
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until MEM LED appears and "01" flashes. Press SET once to store
Memory 1.
3. P ress or to select another station you like to memorize. Then press and hold SET until
MEM LED appears and "01" flashes. Press
store Memory 02.
4. Repeat Step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, simply press the SET once at a time while the radio
is on.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This overrides
the original settings.
USING THE SLEEP TIMER
1. Press the RADIO/SLEEP twice to enter the sleep mode. The SL (SLEEP) LED and the sleep
time "05" (5 minutes) and will flash on the display.
2. P ress the RADIO/SLEEP again as needed to adjust the sleep timer from 5,15, 30, 45, 60, 75,
90 or OFF.
3. W hen the display changes back to show the time, simply press the RADIO/SLEEP twice to
show the sleep time remaining.
4. The radio will play for the programmed sleep time and then turn off automatically.
5. To turn off the radio before the sleep time has elapsed, press
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, unplug the DC jack to disconnect the AC power (and remove
the backup battery). The clock radio will be reset to default settings and you need to set it again.
Hereby, Technotrade declares that this product WT460 is in compliance with the essential require-
ments and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The original
EU declaration of conformity may be found at: www.technoline.de/doc/4029665004600
or once, "02" appears. Press SET once to
/ to scan for the
/ to adjust
once.
EN 4