Idiomas disponibles
Idiomas disponibles
7. Replace the mist control inner cover (2) and outer bamboo cover (1) before
powering on the diffuser.
8. Powered by DC 5V USB cable:
Connect to the power adaptor (not included) using the USB power cord (10).
9. Press and hold the power button (5) to turn on the diffuser and mist effect.
To turn off the unit, press and hold the power button for 2 seconds.
10. Press the timer mode button (6) to select the desired timer. To turn off
the timer, press and hold the timer mode button for 2 seconds.
• For one-hour timer, press the timer mode button (6) once to turn on the
diffuser. The red LED indicator light(7) will turn on. Device will automatically
turn off when it reaches the desired time, the water is exhausted or is below
the water level sensor.
• For two-hour timer, press the timer mode button (6) twice to turn on the
diffuser. The red LED indicator light (7) will turn on. Device will automatically
turn off when it reaches the desired time, the water is exhausted or is below
the water level sensor.
• For three-hour timer, press the timer mode button (6) three times to turn
on the diffuser. The red LED indicator light (7) will turn on. Device will auto-
matically turn off when it reaches the desired time, the water is exhausted or
is below the water level sensor.
• For four-hour timer, press the timer button (6) four times to turn on the
diffuser. The red LED indicator light (7) will turn on. Device will automatically
turn off when it reaches the desired time, the water is exhausted or is below
the water level sensor.
11. To save power and extend the product life, always turn the unit "OFF"
when not in use.
5
