Idiomas disponibles
Idiomas disponibles
The machine has been built using modern technol-
ogy in accordance with recognized safety rules.
Some remaining hazards, however, may still exist.
• The splitting tool can cause injuries to fingers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece is
not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the
socket.
• Use the tools recommended in this manual to obtain
the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
7.
Technical data
Motor V/Hz
230V / 50Hz
Input P1 W
Output P2 W
Operating mode
Motor speed 1/min
Phase inverter
Dimensions D/W/H
850 x 915 x
Table height
Working height
Log length
min. - max.
Log diameter
min. - max. :
Power max. tons*
Piston stroke
400V / 50Hz
3000
2100
2200
1500
S6 40%
S6 40%
2800
2800
-
yes
850 x 915 x
1495
1495
800 mm
920 mm
250 - 550 mm
100 - 300 mm
7
495 mm
www.scheppach.com
Forward speed
Return speed
Oil quantity
Weight approx.
Subject to technical changes!
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Characteristic noise emission values (230V~)
sound power level L
WA
sound pressure level L
pA
uncertainly K
WA/pA
Characteristic noise emission values (400V~)
sound power level L
WA
sound pressure level L
pA
uncertainly K
WA/pA
* S6 40%, continuous operation periodic duty. Identical
duty cycles with a period at load followed by a period
at no load. Running time 10 minutes; duty cycle is 40%
of the running time.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a splitting
force of up to 7 tons. In the basic setting, hydraulic
splitters are set at the factory to an approx. 10% low-
er output level. For safety reasons, the basic settings
must not be changed by the user.
Please note that external circumstances such as oper-
ating and ambient temperature, air pressure and mois-
ture affect the viscosity of the hydraulic oil. In addition,
manufacturing tolerances and maintenance errors can
affect the reachable pressure level.
8. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
4,5 cm/s
16,5 cm/s
3,5 l
98,5 kg
95,5 kg
97,4 dB (A)
89,8 dB (A)
3 dB
98 dB (A)
89,8 dB (A)
3 dB
GB | 25
