Idiomas disponibles
Idiomas disponibles
Inductive load and half-wave rectification load attentions!
We recommend choosing an inverter with a power 2-3 times higher than the
half-wave rectification or inductive load.
Avoid antistatic danger
We recommend that you wear antistatic wrist strap to protect sensitive parts
from static discharge equipment.
Do not disconnect the inverter when turned on
Do not install or disconnect the appliance while it is switched on. Pay maximum
attention when connecting the power cords.
Use only regulated batteries
Use only regulated batteries. Use of unregulated batteries may result in
product malfunction.
Use the battery according to the manufacturer's rules
Use the battery according to the connection rules provided by its manufacturer.
Improper operation can endanger you.
1. Do not shortcircuit the wires. The connections must be made very tightly.
2. Do not touch both battery terminals or wires connected to them at the
same time.
3. Avoid spilling electrolytes. The electrolytes is corrosive for metal and poses
a short-circuit hazard.
4. Keep the battery safe, away from fire or a source of sparks.
Avoid fans harm
Avoid accidental blocking of the fans. Do not use tools or your fingers to stop
them.
Keep the inverter well ventilated
Make sure that the ventilation and air exhaust outputs of the inverter are
not blocked in any way. Also, do not mount the passive radiator part of the
housing attached to a wall, ceiling or floor, but at a distance that allows air to
pass.
5
User manual
