Idiomas disponibles
Idiomas disponibles
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
Tools Needed for Assembly
(Not included)
ne hillips head screwdriver
One stepladder
WARNING
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 9). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts
supplied with this product and/or any accessories designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could
result in personal injury or property damage.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
Ceiling Bracket Assembly (1)
Motor Assembly (1)
Hardware Bags
Wire Connectors (4)
One wire stripper
One
lade
screwdriver
Unpacking Instructions
WARNING
Switch Housing Assembly (1)
LED Assembly (1)
Light Kit/Glass Assembly (1)
Blade Set (1)
1/4"-20 Pan Head Screw
With Lock Washer/Flat Washer (13)
4
Materials
iring outlet o and o connectors
re uired y the local code
conductor
wire with ground of the following si e:
nstalled
ire ength
p to
ft
ft
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Light Kit Wire Cover (1)
Switch Housing Cover (1)
Steel Cap (1)
ust e of type
he
ini u
wire would e a
ire i e
Receiver (1)
Wire Connectors (9)
Hand-held Remote (1)
Wall Plate (1)
Screws (2)
Batteries (2)
