Idiomas disponibles
Idiomas disponibles
How to Assemble Your Ceiling Fan Blades and Light Kit (continued)
5.
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 5)
6.
Assemble the LED assembly to the switch housing
assembly using the two key slots. Replace the removed
screw and secure all three screws. (Figure 6)
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
7.
Secure the glass to the LED assembly by twisting in
a clockwise direction. Twist the glass gradually
snaps onto the LED assembly
(Figure 7)
CAUTION
. Do not over-tighten.
Motor Assembly
Switch Housing
Assembly
LED Assembly
until it
LED
Assembly
Glass
13
LED Assembly
Figure 5
Figure 6
Figure 7
