HISPANUS home kit 1 Manual De Producto página 85

6.2 Cerror code
【22】
EEP ROM
【23】
Model Number Err
【26】 Relax Short
【29】 Bus Volt Low
【30 】
Low Mtd Capacity1
【31】
Low Mtd Capacity 2
【32】
Low Shutdown Mtd Capacity
【34】 Error Can Comm
【35】 For Error Address
【37】
To Share Current Errorl
【38】
Diff Volt For Batt
【39】
For Ac Src Diff
【40】 Paragraph Symbol Error
【41】 Inv Dc Volt Err
【42】
Dif Version Sys Fw
【43】
For Cont Error Line
【44】
Serial number error
Phase splitting error and
【45】 parallel connection
configuration
【58】
BMS communication error
6. Protection
yes
yes
yes
yes
N
N
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
N
85
Memory failure.
Model Configuration Error.
AC output feedback inverter to bypass AC input.
Internal battery power, circuit failure.
Battery capacity rate below 10% alarm (BMS setting to
enable).
Battery capacity rate below 5% alarm (BMS setting to
enable).
Low-capacity battery shutdown (configure BMS to enable).
Parallel CAN Communication Malfunction.
Parallel |D configuration error.
Parallel current equalization error
In parallel mode, the battery voltage difference is large.
In parallel mode, the primary input source is inconsistent.
In parallel mode, hardware sync signal failure.
Inverter Voltage DC Component Abnormal.
Inconsistent Parallel Program Version.
Parallel Wiring Failure.
No factory serial number is configured.
[31] element configuration error.
Check if the communication cable is connected properly
and the item [33] is set to the corresponding lithium
battery communication protocol.