Idiomas disponibles
Idiomas disponibles
• Source address: enter the IP address for art. 1456B configured previously, 192.168.1.200 if the network
configuration is as in case 1 and therefore the default is left unchanged, 192.168.0.5
or another set IP address if the network configuration is as in case 2 and therefore the
default address for art. 1456B has been changed.
f Press Write page to save the configuration.
5. Select Special Settings / Synchronise remote directories and configure the parameters as shown
below:
• ViP address: do not complete
• TCP port: 64100
• UDP Port: 64100
• IP Address: enter the IP address for art. 1456B configured previously, 192.168.1.200 if the network
configuration is as in case 1 and therefore the default is left unchanged, 192.168.0.5 or
another set IP address if the network configuration is as in case 2 and therefore the default
address for art. 1456B has been changed.
f Press Write page to save the configuration.
Configuration of art. UT9279M
Select product number UT9279M and set the following parameters:
1. Select Settings / General
2. set the "Number of characters" field to 6.
3. Press Write page to save the configuration.
1
2
3
27
