Idiomas disponibles
Idiomas disponibles
PERFORMING A DHCP SYSTEM SCAN
Follow the procedure below to perform a DHCP system scan, in order to locate all the devices connected to
interfaces A and B:
•
an IP address will be automatically assigned to the devices in Autoip addressing mode (connected to
interface B);
•
an IP address will be automatically assigned to the devices in DHCP addressing mode (connected to
interface A), if the system is connected to a server with the DHCP function active;
•
devices with a static IP address will be identified only if they have a network address that is compatible
with that of interface A.
1. From Options [a] / Local connections [b], select the network interface [c] to use, tick DHCP enable
[d] and confirm [e].
During the system scan...
AN IP COMPATIBLE
WITH THE SYSTEM
WILL BE ASSIGNED
TO THE PC
E.G. 192.168.0.30
SYSTEM
SCAN
IN DHCP
Installer PC
2.
Launch the system scan by pressing Scan system [f].
» all the devices connected to the system will be displayed in the device list.
f
b
a
c
d
e
21
