Idiomas disponibles
Idiomas disponibles
» item 1456B will appear in the device list [f]
4. In Addressing/ IP address [g] assign device 1456B a static IP address [h] and a IP netmask [i]
compatible with the system, for example IP: 192.168.0.5, netmask: 255.255.255.0 (warning: the IP
address must not already be in use).
5. Enable "Use default gateway" [l] ONLY for the interface connected to the router (interface A by default)
6. Set the gateway address [m] , for example 192.168.0.1 press Write page [n] to save the current settings.
e
f
»
Wait for approximately 1 minute while the device restarts.
»
After restarting, the 1456B device will be on the same network as the router (192.168.0.X).
In the cases of "ViP Network + Internet connection network" systems, take particular
care with regard to the network interface settings and do not configure interfaces A and
B with the same addresses or similar parameters: each IP address must be unequivocal,
the addresses of the interfaces A and B must not belong to the same subnet.
20
Assign to device 1456
network settings that
are compatible with
those of the devices
connected to interface
A so that they can
g
communicate.
Art.1456B
t.
ONLY WITH COMELIT RED CABLE 2E7T000500
ONLY WITH COMELIT RED CABLE 2E7T000500
SETTABLE POE
FIXED POE
NON POE
A1
A2
A3
A4
...
...
ROUTER
192.168.0.1
Installer PC
l
Enable "Use default
gateway" ONLY for the
interface connected to
the router (interface A
by default)
INTERFACE A
STATIC IP ADDRESS
192.168.0.5
192.168.0.X
h
i
m
n
