Trust AMU-500 Guia Del Usuario página 12

8C
Now press the connect button for 3 seconds and
release it.
The auto-off time setup is activated. The LED
indicator shows which mode is active:
M A: On/off
ode
LED flashes 1x
M B: Automatically switch off after 1 sec
ode
LED flashes 2x
M C: Automatically switch off after 5 sec
ode
LED flashes 3x
M d: Automatically switch off after 2 min
ode
LED flashes 4x
8D
Send a signal with the remote control once to
activate M B. Send a signal to twice to activate
ode
M C. Send a signal three times to activate
ode
M d.
ode
If you have sent one signal too many, send an
'off' signal to go back one option.
NOTE! If no signal is sent within 10 sec the setup
is automatically ended.
AMU-500 UNIVERSAL SWITCH
8E
Press the connect button three times once you
have selected the right option. The LED indicator
will flash twice to confirm.
9. Fitting and covering the receiver
Mount the universal switch in a standard junction
box, splash-proof junction box OWH-001 (sold
separately) or other type of enclosure (e.g. the
housing of the motor, as long as it is not made of
metal). Finally, cover the box.
Make sure you always have access to the
receiver, for example to reset it or bind a new
transmitter.
10. Wireless operation
Send an 'on' signal with the transmitter to
operate the connected devices wirelessly.
Send an 'off' signal to switch off the connected
devices.
EN
4