Connecting Unions And Probes - TECNOMOTOR 810 Manual Operativo

6

Connecting unions and probes

Connect the connection pipe between analyser and oil separator to the unions
marked with the symbols indicated in the table below.
The probe kit consists of:
Steel sampling probe with special clamp for fitting on exhausts for two-
❑
stroke vehicles (see Figure 1)
Steel sampling probe with flexible rod for fitting on exhausts for four-stroke
❑
vehicles (see Figure 2)
Kit with oil separation system with 4 connections for using several probes at
❑
the same time (see Figure 3)
GAS ANALYSER OIL SEPARATOR
Fig.1
Fig.2
43