Jocel JET-014832 Manual De Instrucciones página 43

Fig.1 Fig.2
Fig.3
1. Drill holes according to the instructions of fig. 2
2. Place the tubes into the holes of the wall.
3. Set up grips with screws (Fig. 4)
4. Place the T. Emitter on the upper grips
5. Place the down grips to maintain the appliance against the wall.
6. Screw down grips down with screws.
CAUTION: Before starting the appliance, make sure it's Wall-mounted correctly. If it's
not parallel to the floor, technical problems can occur.
43