Idiomas disponibles
Idiomas disponibles
TECHNICAL DATES
Voltage
Rated Power
Idle speed
Disc diameter
Spindle thread
Sound pressure level (LPA) (uncertainty K = 3 dB)
Sound power level (LWA) (uncertainty K = 3 dB)
Vibration (uncertainty K = 1,5 m/s²)
Protection class
NOISE AND VIBRATION INFORMATION
Measured values determined according EN 60745
• The vibration emission level given in this information sheet has been measured in accordance
with a standardized test given in EN 60745 and may be used to compare one tool with another.
• The given vibration emission level may be used for the initial estimation of the real exposure.
• The vibration emission level will vary because of the ways in which a power tool can be
used and may increase above the level given in this information sheet.
• Try to keep the exposure as low as possible. To reduce the vibration emission level the
user should wear working-gloves and use the machine for limited time.
• All parts of working cycles have to be considered (including the time the power tool is
switched off, and the time, when the power tool is running under no-load condition).
The strength of the tightening flange corresponds to the specifications of standard EN 10025 for
steel FE 430 B, or a material with a similar strength.
The tensile strength of the protective hood is 270-450 N/mm, and the minimum breaking
elongation is 28% (length of test bar: 50 mm).
Be sure to wear safety goggles, dust mask and ear-
protection during use!
15
230 V ~ 50 Hz
900 W
11000 rpm
115 mm
M14
88,7 dB(A)
99,7 dB(A)
11,786 m/s²
/ II
