UFESA CE8121 Manual De Instrucciones página 39

Idiomas disponibles

Idiomas disponibles

3. SETTING UP THE COFFEE MAKER
3.1. Selecting the temperature
Coffee temperature can be adjusted to suit your preference. While the coffee
maker is plugged in, proceed as indicated below:
1. If the coffee maker is switched on, touch the icon
to switch it off.
All the indicators will go off.
2. Touch the icon
for 3 seconds. A beep will
be heard and the indicator will light up showing prese-
lected temperature level. Indicator of the icon
flash
3. Touch the icon
repeatedly for changing water temperature. Indicators will light up successively
with each touch.
MINIMUM
4. Touch the icon
to confirm your choice.
All the indicators will go off again.
3.2. Selecting water hardness
Water hardness can be selected to be adapted to the characteristics of the water in your area. You can
inquire about the water hardness with your local water supplier, or use test strips to determine it.
Test strips are supplied depending on the model or may be purchased from after sales service or spe-
cialist shops (see section "Accessories").
To change water hardness, while the coffee maker is plugged in, proceed as indicated below:
If test strips are used:
- Immerse the test strip in tap water for 2-5 seconds
- Wait for 30 seconds. The number of stripes that turn red indicate the water hardness
Very soft
Soft
76
will
MEDIUM
MAXIMUM
Medium
Hard
Very hard
1. If the coffee maker is switched on, touch the icon
to switch it off.
All the indicators will go off.
2. Touch the icon
for 3 seconds.
A beep will be heard and indicators will light up showing preselected
water hardness. "Very hard" hardness is selected by default from fac-
tory. The indicator of the icon
will flash.
3. Touch the icon repeatedly for changing water hardness. Indicators located at the base of the level bars
will go off successively with each touch.
VERY HARD
HARD
(more than 22ºdH)
(15-21ºdH)
4. Touch the icon
to confirm your choice.
All the indicators will go off again.
3.3. Adjusting user choices
Maximum water volume dispensed for each kind of drink may be selected and recorded as default value.
Proceed as indicated below:
1. Touch the icon
to switch the coffee maker on.
Wait until all the indicators light up permanently.
MEDIUM HARDNESS
SOFT
(7-14ºdH)
(up to 7ºd)
77
loading