Improvements; Transport And Packaging; Installation And Operation; Connection To A Compressed Gas Cylinder - Emerson Tescom WegaMed Instrucciones De Uso

• The user of the pressure regulator is responsible for taking all of the necessary
safety precautions to ensure the safe operation of the equipment. The user and
operator are responsible for deciding which precautions to take.
• These instructions for use form an integral part of the pressure regulator.
en
Operators must be given access to these instructions. Additional copies can be
supplied on request.
3.3

Improvements

If you have any suggestions for improving the product or the instructions for use, we
would be delighted to hear from you. Both our products and the instructions for use
are subject to a process of continuous development and improvement. The address
and telephone number for TESCOM EUROPE GmbH & CO. KG appear on the last page of
these instructions for use.
4

TRANSPORT AND PACKAGING

The appliance may only be transported (e.g. delivery to the manufacturer) and stored
in suitable, sturdy packaging (e.g. the original packaging). During transport and storage
the inlet and outlet connections must be covered by suitable and clean protective caps/
plugs.
5

INSTALLATION AND OPERATION

• The user and operator are responsible for using and operating the appliance and
accessories.
• You must wash your hands thoroughly before commencing any work involving the
gas supply. Hydrocarbon compounds (e.g. oils, greases, rubbing alcohols, hand
creams or remains of adhesive plasters) can cause explosive reactions if they come
into contact with highly compressed gases.
•
5.1

Connection to a compressed gas cylinder

The use of dust-free, dry medical gases is essential if the TESCOM EUROPE pressure
regulator is to function as intended.
Medical gases and test gas mixtures are a medicinal product and may
only be administered under the supervision of qualified medical staff who
are familiar with the precautions for the respective application. The safety
data sheets and information provided by the gas manufacturers must be
observed.
50