Idiomas disponibles
Idiomas disponibles
The coffee is flowing too slowly.
The coffee is too light or not full-
bodied enough.
The espresso or the coffee is not
hot enough.
Clear water is running from
the coffee nozzles before each
coffee.
If one of the problems outlined in the table persists, contact the KRUPS Consumer Service.
Caution:
Manufacturer:
SAS GSM
Rue Saint-Léonard F-53104 Mayenne
France
30
PROBLEM
Turn the "fineness of grinding" button to the right to obtain a coarser
ground coffee (this may depend on the type of coffee used).
Perform one or several rinsing cycles.
Change the Claris Aqua Filter System cartridge.
Avoid the use of oily, caramelised or flavoured coffees.
Check that the bean container contains coffee and that it is moving
down correctly.
Decrease the volume of the preparation and increase the strength of
the preparation using the coffee strength function.
Turn the "fineness of grinding" button to obtain a finer ground coffee.
Make your drink in two cycles using the 2-cup function.
Perform a coffee rinsing circuit before you start to make your coffee.
Increase the temperature of the coffee in the machine's settings.
Heat the cup in the rinsing with hot water before starting to prepare
the drink.
As part of the pre-brewing process, water can come out of the coffee
nozzles.
CORRECTIVE ACTIONS
