3. "Max Range" offers better IR flash range. Given IR flash range values are based
on Max Range setting; so please adjust Night Mode to Max Range for better
night vision flash range;
4. High-quality 1.5V NiMH rechargeable AA batteries can also offer much better
IR flash range; alkaline batteries cannot deliver enough amperage to power the
illuminator consistently at night;
5. To ensure accuracy and quality of night time image, please mount camera to
dark environment without any obvious light sources;
6. A certain surroundings (like trees, walls, ground, etc.) within flash range can get
you better night time images; please do not aim camera to total open field where
there is nothing within IR flash range to reflect flash back; it's like shinning a
flashlight into sky in night, you just can't see anything; same does camera;
Camera does not send photos via email
1. Check the SIM card in a phone for: running and presence of active Internet /
mobile data, PIN removed;
2. Check the card's GPRS internet settings; If the network logon error message
appears, manually complete these settings according to the manual and the
settings received from the GSM operator;
3. Check whether In sender's mail settings if Default mode is enabled (with camera
automatic send server); If you want manual settings with a personal account,
check if these settings are correct with your mail provider, and if you removed
all the security restrictions in your mail account.
4. Check that the "Send To" mail addresses are written correctly, without spaces
before or after; Check and delete the phone numbers in the same menu, if
available.
5. Make sure you do not have other functions activated in the room and immediately
turn them off: MMS, Timer, Delay, Time Lapse, Daily Report.
6. Activating the MMS function without an active MMS service on the card can
block sending pictures via MMS and e-mail.
Camera does not send photos via MMS
1. Check your SIM card in a phone for: MMS enabled; send and receive MMS
messages with another smartphone.
2. Check the card's GPRS internet settings; If the network logon error message
appears, manually complete these settings according to the manual and the
settings received from the GSM operator;
3. Check your MMS settings, and if there are any differences or suspicions, ask for
the correct settings from the GSM operator, and manually enter the camera.
4. Verify that you have filled out the phone / mail number correctly in the "Send
to".
User manual
EN
27