Tabla de contenido
ANTI-TIP SAFETY HARDWARE INSTALLATION
WARNINGS:
Tipping furniture may injure young
•
children. Use of this tipping restraint
hardware is highly recommended.
When properly instated this hardware
•
could provide protection against the
unexpected tipping of furniture due to
improper use.
This hardware is only a deterrent. Adult
•
supervision is the only proper deterrent
to prevent improper use of any
potentially hazardous product.
INSTALLATION STEPS:
Attach one of the mounting
•
brackets securely to the
back top edge of the
furniture using the short
screw.
Find the stud in the wall
•
and mark the location on
the wall for mounting the
second bracket using a 2"
wood screw approximately 2" below the
bracket mounted to the edge of the furniture.
If a stud cannot be found, purchase a
•
"Hollow-Wall Anchor Bolt" and attach the second
bracket to the wall using that bolt. Make sure to follow
all instructions by the manufacturer.
Place the furniture so the bracket on the back edge is in
•
line with the bracket on the wall.
Lace an end of the nylon restraint strap down through each
•
bracket. Bring both ends together and slide the beaded end of the
strap through the key hole shaped slot in the other end tightly. Pull
down on the beaded end until it snaps locks into the keyhole.
Check to make sure the strap is securely laced and locked to the brackets.
•
28
www.sweetpeababy.com/help
Tabla de contenido
